18 Nov TGDI Engines Projected to Dominate New-Vehicle Sales by 2020
Turbochargers create severe conditions best suited for synthetic oil
The industry trend toward smaller engines that deliver increased power and fuel efficiency has been well-documented. You’ve heard us talk at length about the key technologies that enable today’s advanced engines turbochargers, gasoline direct injection (GDI) and variable valve timing (VVT). Amsoil gave a nice explanation of each technology and, most importantly to us, how they affect motor oil.
In short, they’re brutal on oil. It’s one of the reasons more automakers are installing synthetics at the factory.
A quick refresher course. GDI technology locates the fuel injectors directly in the cylinder as opposed to the manifold. This arrangement allows for greater control over the injection event, allowing engineers to fine-tune engines for greater efficiency and power. One side effect is fuel contaminating the oil. As fuel is sprayed into the combustion chamber, it can wash past the rings and down the cylinder walls, into the oil sump. Ford* has seen the issue frequently enough to release a technical service bulletin (14-0040) titled “Fuel Odor From Engine Oil and/or Engine Oil Level Overfull” to address F-150 trucks equipped with the 3.5L Ecoboost* engine. Fuel dilution varies by engine type and driving conditions, with some vehicles showing no issues.
There are two main side effects of fuel in the oil. First, fuel thins the oil, sometimes reducing the viscosity below the specified grade. If not accounted for in the design of the engine, this can impact wear rates and have an effect on systems that use the oil to function, like VVT. Second, significant fuel contamination increases the rate of oil degradation. For these reasons, oil analysis labs typically condemn oil samples when the fuel content is greater than five percent.
Many GDI engines are turbocharged (TGDI). Turbos push more air into the combustion chamber, and tuning for efficiency can improve fuel economy, especially when combined with other technologies, such as direct injection. Operating at up to 150,000 rpm on exhaust gases that can exceed 1,000ºF, turbos create extreme conditions that can cause low-quality oils to quickly break down, creating deposits and shortening the life of the oil. By 2020, industry experts predict nearly every new vehicle sold will come equipped with GDI technology, and the vast majority will be turbocharged.
Many car owners – and even more in the future – probably see only the tremendous benefits of improved power and fuel economy from their TGDI vehicles. Most don’t realize the toll modern engines take on motor oil. As an AMSOIL Dealer, having your customers’ best interests in mind is central to your business. It means pointing out the challenges their vehicles present to motor oil. It means recommending AMSOIL synthetic lubricants as a way to get the most out their vehicles. And in this case, it means
reminding them their TGDI vehicle falls under the AMSOIL severe service designation. Providing this service will become more important as more TGDI vehicles take to the roads.
Like most vehicle manufacturers, AMSOIL has long recommended different service intervals based on “normal” or “severe” driving conditions. Turbocharged vehicles are automatically included in the severe service category due to the extreme heat. To ensure your customers have the information they need to properly maintain their vehicles, we’re soon adding a notice to the AMSOIL Product Guides at www.amsoil.com that reminds owners of turbocharged vehicles to follow the severe-service recommendation. That means customers using Signature Series Synthetic Motor Oil in TGDI engines can extend drain intervals up to 15,000 miles/700 hours/12 months, whichever comes first, and should only extend oil changes beyond that with the guidance of oil analysis.
As proven in numerous tests, AMSOIL synthetic motor oils remain the best oil for these challenging engines. For example, the TEOST Test determines an oil’s tendency to form deposits at high temperatures and is a good indicator of turbocharger protection. In the test, Signature Series 5W-30 Synthetic Motor Oil minimized deposits and easily surpassed API SN requirements. In the extreme heat of the Sequence IIIG Test, Signature Series scored 86 percent better for piston deposits than required by API SN, even after doubling the length of the test.